Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-CURRENT #3: Fri Sep 28 11:23:30 PDT 2007
    root@daemons.somedomain.com:/usr/obj/usr/src/sys/GENERIC
WARNING: WITNESS option enabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Dual-Core AMD Opteron(tm) Processor 2210 HE (1800.09-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0x40f12  Stepping = 2
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x2001<SSE3,CX16>
  AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
  AMD Features2=0x1f<LAHF,CMP,SVM,ExtAPIC,CR8>
  Cores per package: 2
usable memory = 4281344000 (4083 MB)
avail memory  = 4123901952 (3932 MB)
ACPI APIC Table: <082907 APIC1947>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
ioapic0 <Version 1.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <082907 XSDT1947> on motherboard
acpi0: [ITHREAD]
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 25000000 Hz quality 900
acpi0: Power Button (fixed)
acpi0: reservation of fec00000, 1400000 (3) failed
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, d7f00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x2008-0x200b on acpi0
cpu0: <ACPI CPU> on acpi0
powernow0: <PowerNow! K8> on cpu0
cpu1: <ACPI CPU> on acpi0
powernow1: <PowerNow! K8> on cpu1
cpu2: <ACPI CPU> on acpi0
powernow2: <PowerNow! K8> on cpu2
cpu3: <ACPI CPU> on acpi0
powernow3: <PowerNow! K8> on cpu3
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> port 0x2f00-0x2f7f at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xfdcfb000-0xfdcfbfff irq 21 at device 2.0 on pci0
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 10 ports with 10 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfdcfac00-0xfdcfacff irq 22 at device 2.1 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb1: EHCI version 1.0
usb1: companion controller, 10 ports each: usb0
usb1: <EHCI (generic) USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: <nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb1
uhub1: 10 ports with 10 removable, self powered
atapci0: <nVidia nForce MCP55 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 4.0 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
atapci1: <nVidia nForce MCP55 SATA300 controller> port 0xc480-0xc487,0xc400-0xc403,0xc080-0xc087,0xc000-0xc003,0xbc00-0xbc0f mem 0xfdcf9000-0xfdcf9fff irq 23 at device 5.0 on pci0
atapci1: [ITHREAD]
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
atapci2: <nVidia nForce MCP55 SATA300 controller> port 0xb880-0xb887,0xb800-0xb803,0xb480-0xb487,0xb400-0xb403,0xb080-0xb08f mem 0xfdcf8000-0xfdcf8fff irq 20 at device 5.1 on pci0
atapci2: [ITHREAD]
ata4: <ATA channel 0> on atapci2
ata4: [ITHREAD]
ata5: <ATA channel 1> on atapci2
ata5: [ITHREAD]
atapci3: <nVidia nForce MCP55 SATA300 controller> port 0xb000-0xb007,0xac00-0xac03,0xa880-0xa887,0xa800-0xa803,0xa480-0xa48f mem 0xfdcf7000-0xfdcf7fff irq 21 at device 5.2 on pci0
atapci3: [ITHREAD]
ata6: <ATA channel 0> on atapci3
ata6: [ITHREAD]
ata7: <ATA channel 1> on atapci3
ata7: [ITHREAD]
pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci1: <ACPI PCI bus> on pcib1
ahc0: <Adaptec 2940 Ultra2 SCSI adapter> port 0xd800-0xd8ff mem 0xfddff000-0xfddfffff irq 16 at device 6.0 on pci1
ahc0: [ITHREAD]
aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs
vgapci0: <VGA-compatible display> port 0xd000-0xd0ff mem 0xf0000000-0xf7ffffff,0xfdde0000-0xfddeffff irq 17 at device 7.0 on pci1
nfe0: <NVIDIA nForce MCP55 Networking Adapter> port 0xa400-0xa407 mem 0xfdcf6000-0xfdcf6fff,0xfdcfa800-0xfdcfa8ff,0xfdcfa400-0xfdcfa40f irq 22 at device 8.0 on pci0
miibus0: <MII bus> on nfe0
e1000phy0: <Marvell 88E1149 Gigabit PHY> PHY 16 on miibus0
e1000phy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
nfe0: Ethernet address: 00:e0:81:48:f8:42
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe1: <NVIDIA nForce MCP55 Networking Adapter> port 0xa080-0xa087 mem 0xfdcf5000-0xfdcf5fff,0xfdcfa000-0xfdcfa0ff,0xfdcf4c00-0xfdcf4c0f irq 23 at device 9.0 on pci0
miibus1: <MII bus> on nfe1
e1000phy1: <Marvell 88E1149 Gigabit PHY> PHY 17 on miibus1
e1000phy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
nfe1: Ethernet address: 00:e0:81:48:f8:43
nfe1: [FILTER]
nfe1: [FILTER]
nfe1: [FILTER]
nfe1: [FILTER]
nfe1: [FILTER]
nfe1: [FILTER]
nfe1: [FILTER]
nfe1: [FILTER]
pcib2: <ACPI PCI-PCI bridge> at device 10.0 on pci0
pci2: <ACPI PCI bus> on pcib2
mpt0: <LSILogic SAS/SATA Adapter> port 0xe000-0xe0ff mem 0xfe9fc000-0xfe9fffff,0xfe9e0000-0xfe9effff irq 18 at device 0.0 on pci2
mpt0: [ITHREAD]
mpt0: MPI Version=1.5.13.0
mpt0: mpt_cam_event: 0x16
mpt0: Unhandled Event Notify Frame. Event 0x16 (ACK not required).
mpt0: mpt_cam_event: 0x12
mpt0: Unhandled Event Notify Frame. Event 0x12 (ACK not required).
mpt0: mpt_cam_event: 0x12
mpt0: Unhandled Event Notify Frame. Event 0x12 (ACK not required).
mpt0: mpt_cam_event: 0x16
mpt0: Unhandled Event Notify Frame. Event 0x16 (ACK not required).
pcib3: <ACPI PCI-PCI bridge> at device 13.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <PCI-PCI bridge> at device 0.0 on pci3
pci4: <PCI bus> on pcib4
pcib5: <PCI-PCI bridge> at device 0.0 on pci4
pci5: <PCI bus> on pcib5
amr0: <LSILogic MegaRAID 1.53> mem 0xfcff0000-0xfcffffff,0xfeb00000-0xfebfffff irq 19 at device 14.0 on pci5
amr0: Using 64-bit DMA
amr0: [ITHREAD]
amr0: delete logical drives supported by controller
amr0: <LSILogic LSI MegaRAID SATA300-8X PCI-X> Firmware 815C, BIOS H432, 128MB RAM
pcib6: <PCI-PCI bridge> at device 0.1 on pci3
pci6: <PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> at device 14.0 on pci0
pci7: <ACPI PCI bus> on pcib7
pcib8: <ACPI PCI-PCI bridge> at device 15.0 on pci0
pci8: <ACPI PCI bus> on pcib8
acpi_button0: <Power Button> on acpi0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A, console
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 drq 0 on acpi0
sio1: type 16550A
sio1: [FILTER]
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FILTER]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
ipmi0: <IPMI System Interface> on isa0
ipmi0: KCS mode found at io 0xca8 alignment 0x4 on isa
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc8fff,0xc9000-0xca7ff,0xca800-0xcafff on isa0
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
acd0: DVDR <PIONEER DVD-RW DVR-212D/1.09> at ata2-master SATA150
Waiting 5 seconds for SCSI devices to settle
amr0: delete logical drives supported by controller
amrd0: <LSILogic MegaRAID logical drive> on amr0
amrd0: 915525MB (1874995200 sectors) RAID 5 (optimal)
ipmi0: IPMI device rev. 0, firmware rev. 0.2, version 2.0
ipmi0: Number of channels 4
ipmi0: Attached watchdog
da0 at mpt0 bus 0 target 11 lun 0
da0: <LSILOGIC Logical Volume 3000> Fixed Direct Access SCSI-2 device 
da0: 300.000MB/s transfers
da0: Command Queueing Enabled
da0: 69618MB (142577664 512 byte sectors: 255H 63S/T 8875C)
sa0 at ahc0 bus 0 target 2 lun 0
sa0: <HP C1537A L610> Removable Sequential Access SCSI-2 device 
sa0: 10.000MB/s transfers (10.000MHz, offset 32)
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
WARNING: WITNESS option enabled, expect reduced performance.
Trying to mount root from ufs:/dev/da0s1a